Seat Heater Switch Adapter - Installation Guide
This installation guide is for the following Part Number.
PP-SUHS001-0
General Installation Notes
This guide is for part number PP-SUHS001-0, which is the seat heater adapter harness that converts from separate connectors for independent seat switches to the STi model, featuring a single connector that controls the seat heater settings for both seats.
Simply plug in the old switches to the blue and white 4-pin connectors and the 8-pin connector into the STi heater switch.
STi LED Illumination
If you have the STi center console with STi LED, you will need to tap into the original vehicle harness for illumination. There are several places where you can do this. Below is a quick reference for these locations. Once you have found the location that suits your project, simply clamp on the attached T-Taps. Once the T-Taps are securely attached to the wire, insert the spade terminals from the main harness into the split power and ground connections.